1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
25
2.5 Door Unlocking Setting
RFID Card
Step 1: Access control settings on web page→EGS Setting→Add Card Rule →Select "Type" ("Normal" card
provides door opening function, "Add" card and "Del" card provide add and delete card function,
Default "Normal" card)
Step 2: Enter your name and card number (just enter the first 10 digits of the card number), and click "Add" to
add the card to the list.
Step3: Access the card reading area of the device through the configured ID card to open the door.
Remote Password
Step 1: Set access control on the web page→ EGS Setting→Password→ Add password rule → Select
"Remote "
Step 2: Enter the Name, Password and Number. Press Add to Password Table.
Step 3: The owner answers the access control call and presses " * " (default password) or "123456" (new
password) to open the door for visitors.
To Next Page
Loading...
Need help?
General
