1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
29
3.6 Auto Answer
The user can turn off the auto-answer function (enabled by default) on the device webpage, and the ring tone
will be heard after the shutdown, and the auto-answer will not time out.
Web interface:
Enter [Line] >> [SIP], Enable auto answer and set auto answer time and click submit.
Figure 3-6-1 Line Enable Auto Answer Setting Page Screenshot
SIP P2P auto answering:
Enter [Line] >> [Basic settings], enable auto answer and set auto answer time and click submit.
Figure 3-6-2 Enable IP Call Auto Answer Setting Page Screenshot
Auto Answer Timeout(0~120)
The range can be set to 0~120s, and the call will be answered automatically when the timeout is set.