1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
89
5.41 EGS Setting >> Password
Figure 5-41-1 Password Rule Setting Page Screenshot
Click the <Select> button to choose and import the remote password list file (passwordlist.csv).
Then, click <Update> to perform a batch import of remote password rules.
In the "Local" mode, the local door opening password can be used. Enter the
password on the dial interface in standby, and inputting the set opening
password will open the door immediately.
For the "Remote" mode, the remote opening password is utilized. When the
indoor unit calls the door or when the door calls the indoor unit, enter the
DTMF password to open the door.
In the "Remote and local" mode, one password supports both local and
remote door opening methods simultaneously.
In the "Closed" mode, attempting to open the door with a password is
unsuccessful after disabling.
In the "Enable" mode, the password for opening the door becomes effective
after enabling.
For the "Time zone" mode, the password for opening the door takes effect
only during the set time zone.
The number of times the door can be opened with a password in a time
To Next Page
Loading...
Need help?
General
