1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
28
3.3 Making Calls
After setting the function key to Hot key and setting the number, press the function key to immediately call out
the set number, as shown below:
Figure 3-3-1 Function Setting Page Screenshot
After setting the speed dial according to the above settings, you can directly dial the set number by pressing
the button .
3.4 Answering Calls
After setting up the automatic answer and setting up the automatic answer time, it will hear the ringing bell
within the set time and automatically answer the call after timeout. Cancel automatic answering. When a call
comes in, you will hear the ringing bell and will not answer the phone over time.
3.5 End of the Call
You can hang up the call through the Release key (you can set the function key as the Release key) or turn on
the speed dial button to hang up the call.
To Next Page
Loading...
Need help?
General
