Planet HDP-1261PT User Manual

1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
41
Option 120
SIP Plug and Play (PnP)
Enable SIP PnP
Whether enable PnP or not. If PnP is enabled, phone will send a SIP
SUBSCRIBE message with broadcast method. Any server can
support the feature that will respond and send a Notify with URL to
phone. Phone could get the configuration file with the URL.
Server Address
Broadcast address. As default, it is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.
Static Provisioning Server
Server Address
Provisioning server address. Support both IP address and domain
address.
Configuration File
Name
The configuration file name. If it is empty, phone will request the
common file and device file which is named as its MAC address.
The file name could be a common name, $mac.cfg, $input.cfg. The file
format supports CFG/TXT/XML.
Protocol Type
Transferring protocol type ，supports FTP、TFTP、HTTP and HTTPS
Update Interval
Configuration file update interval time. As default it is 1, means phone
will check the update every 1 hour.
Update Mode
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
Static Provisioning Server
TR069
Enable TR069
Enable TR069 after selection
ACS Server Type
There are 2 options Serve type, common and CTC.
ACS Server URL
ACS server address
ACS User
ACS server username (up to is 59 character)
ACS Password
ACS server password (up to is 59 character)
Enable TR069
Warning Tone
If TR069 is enabled, there will be a prompt tone when connecting.
TLS Version
TLS Version
STUN
server address
Enter the STUN address
Enable the STUN
Enable the STUN

Planet HDP-1261PT Specifications

General

Brand	Planet
Model	HDP-1261PT
Category	Intercom System
Language	English