1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT
77
The start time of the day when the <Day/Night> mode is defined. Default
"06:00"
The end time of the day when the <Day/Night> mode is defined. Default
"18:00”
Memory
Enter the phone number in the input box. When you press the function key, the device will call out the set
phone number. This button can also be used to set the IP address, press the function key to make an IP direct
call.
Figure 5-31-2 Memory Key Setting Page Screenshot
Fill in the SIP
account or IP
address of the
called party
The line
correspond
ing to the
SIP
account
Using the speed dial mode, press the button to quickly
dial the set number.
Using the intercom mode, when the SIP phone at the
opposite end supports the intercom function, the call
can be automatically answered.
Multicast
Multicast function is to deliver voice streams to configured multicast address; all equipment monitored the
multicast address can receive and play the broadcasting. Using multicast functionality would make deliver
voice one to multiple which are in the multicast group simply and conveniently.
The DSS Key multicast web configuration for calling party is as follows:
Set the host IP address and port number. They must
be separated by a colon (The IP address range is
224.0.0.0 to 239.255.255.255, and the port number is
preferably set between 1024 and 65535).
PTT
Keep pressing the shortcut key set to make a call, release it and hang up.
To Next Page
Loading...
Need help?
General
