Planet IPX-330 - Ipsec VPN Client (Tunnel Mode)

Internet Telephony PBX System
IPX-330/IPX-2100
102
On IP PBX system we support N2N VPN client, Check the radio button of N2N VPN and
configure the client info.
Item Explanation
Enable Tick this checkbox to enable N2N VPN client
Server Address N2N server(supernode) IP address.
Port N2N service port number. 82 by default.
Local IP VPN local IP.
Subnet Mask Netmask of the VPN network.
Local Port N2N local service port.
Username/Password Used for the N2N server to authorize the connection.
4.4.4 IPSec VPN Client (Tunnel mode)
On the remote site, open the web GUI of another Planet IPPBX system and navigate to web
menu Network Settings->VPN Client.
On VPN Client page choose IPSec and tick “Enable” option to enable IPSec client.
Item Explanation
Enable Tick the checkbox to enable IPSec client.
Type Accordingly as the IPSec server.