Internet Telephony PBX System
IPX-330/IPX-2100
108
Item Explanation
Enable Enable TR069 service.
CPE to ACS URL Input URL to visit ACS, which is used by PBX to connect ACS via
CPE WAN management protocol (CWMP).
ACS
Authentication
Mode
Select ACS Authentication Mode: NONE/ BASIC/ DIGEST.
ACS Username When PBX send request to ACS, ACS will provide username to the
authorized PBX.
ACS Password When PBX send request to ACS, ACS will provide password to the
authorized PBX.
CPE Inform
Interval (sec)
Interval for CPE to connect ACS.
ACS to CPE URL Input URL to visit CPE. Format: http://IP:port(7547).
4.9 Troubleshooting
Troubleshooting includes two tools for you to check the network reachability, ping and
traceroute. With these tools you'll get an outside view of your network response time and
network topology, which allows you to track down possible errors more easily
Click【Network Settings】->【Troubleshooting】:
4.9.1 Ping
The ping command is a very common method for troubleshooting the accessibility of devices.
It uses a series of Internet Control Message Protocol (ICMP) Echo messages to determine:
z Whether a remote host is active or inactive.
z The round-trip delay in communicating with the host.
z Packet loss.
To Next Page
Loading...
