Internet Telephony PBX System
IPX-330/IPX-2100
71
Select the extensions from the “Extensions” column to the “ONS Group Members” column. In
the “Main Extension” dropdown list select an extension to be the main extension number. And
click on “Save” you’ll have a new one number stations group.
In this case, no matter 407, 408 or 409, if they call other extensions others only see it is
extension 407 calling. Others call 407, all these 3 extensions will ring.
As you can see on this page there’s a feature code Switch Station available.
This feature code is used to switch extension during a phone call. For example, an inbound
call called extension 407, the one number stations member 408 answered this call, you can
press *1 from extension 407 or 409 to switch this live call to 407 or 409, 408 will be
disconnected.
3.5.11 Paging And Intercom
The Paging and Intercom feature allows you to use your phone system as an intercom system,
provided that your endpoints (phone devices) support this functionality. The Paging and
Intercom feature allows you to define a number (just like an extension or Ring Group number)
that will simultaneously page a group of devices. For example, in a small office, you might
define a paging group that allows any user to dial 699, allowing them to page the entire office.
You can also use the feature code *50/*51 to page/intercom a single extension, by dialing
*50/*51 followed by the extension number..
Click【Advanced】->【Paging and Intercom】->【New Paging Group】:
To Next Page
Loading...
