EasyManua.ls Logo

Planet IPX-330 - DHCP Client List; Static Mac

Planet IPX-330
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Internet Telephony PBX System
IPX-330/IPX-2100
104
Item Explanation
Start IP, End IP Specify the DHCP IP address pool.
Subnet Mask Netmask to be assigned to the client devices.
Gateway Gateway address to be assigned to the client devices
Primary DNS DNS to be assigned to the client devices.
Lease Time(min) DHCP server leases an address to a new device for a period of time.
When the lease expires, the DHCP server might assign the IP
address to a different device.Default value is 1440 minutes.
TFTP Server Point out the TFTP server address which may be used to auto
provision the IP phones.
4.5.2 DHCP Client List
You’ll have all the devices that are getting IP address from the IP PBX system.
ClickNetwork Settings->DHCP Server->DHCP Client List:
This page is used to display DHCP Client address and related information.
When DHCP Server distributes address, the Client’s MAC address is associated with the IP
address, and then the device will get the same IP address every time.
4.5.3 Static Mac
Static MAC is a useful feature which makes the DHCP service on IP PBX always assigns the
same IP address to a specific computer or IP phone on your LAN. To be more specifically, the
DHCP service assigns this static IP to a unique MAC address assigned to each NIC on your
LAN.

Table of Contents

Other manuals for Planet IPX-330

Related product manuals