Internet Telephony PBX System
IPX-330/IPX-2100
89
Click【Network Settings】->【Network】->【IPv6 Settings】
IPv6 Reference:
Item Explanation
Enable Enable IPv6, define the IPv6 address, gateway, and DNS.
4.1.3 VLAN Settings
With a layer-3 switch you can configure VLAN on IP PBX system to divide the VoIP and data
traffic. Voice VLAN can keep the phones working even when the data network is congested.
You can see here on this page, you are able to configure 4 VLANs, 2 for each WAN or LAN
port.
To Next Page
Loading...
