Internet Telephony PBX System
IPX-330/IPX-2100
107
4.7 SNMPv2 Settings
SNMP (Simple Network Management Protocol) is used for remote management.
Click【Network Settings】->【SNMPv2 Settings】:
Reference
Item Explanation
Enable Enable “Read Only” of SNMP
RO Community Define the name of RO Community of SNMP
RO Network Define network of RO
4.8 TR069
TR069 (Technical Report 069) is a Broadband Forum (formerly known as DSL Forum)
technical specification entitled CPE WAN Management Protocol (CWMP). It defines an
application layer protocol for remote management of end-user devices.
To Next Page
Loading...
