Internet Telephony PBX System
IPX-330/IPX-2100
130
The “Restore Default Set” option is used to reset the IP PBX system configurations
while upgrading, if no otherwise specified you don’t have to enable this option to
reset the IP PBX system. If you want to reset, it will reset all system configurations
including the network profiles.
7.6.2 TFTP Upgrade
If you don’t have a TFTP server, you can Google tftpd32 and download this application to
setup a lightweight TFTP server on your Windows.
Please click “Browse” on the TFTP application window to locate the new firmware. And in the
“Server Interface” dropdown list it’s a list of your PC network interfaces. Please select a correct
interface (in the same network) which can access the IP PBX system.
On the IPPBX web GUI please check the “TFTP Upgrade” radio button, and specify the exact
firmware file name on the “Enter The Package Name” blank, and in the “TFTP Server IP
address” blank please specify the IP address displayed on the TFTP application window.
To Next Page
Loading...
