Internet Telephony PBX System
IPX-330/IPX-2100
86
Chapter 4. Network Settings
4.1 Network
IPPBX system supports static IP, DHCP and PPPoE as WAN connection options, and on LAN
port only static IP is supported. If you are configuring WAN connection as static IP or DHCP,
make sure WAN and LAN IP addresses are not in the same network.
4.1.1 IPv4 Settings
Click【Network Settings】->【Network】->【IPv4 Settings】
Reference
Item Explanation
IP Assign Static/ DHCP/PPOE supported.
LAN Interface Define the LAN interface.
By default IP PBX had been preconfigured with static IP 172.16.0.1 and 192.168.0.1 on WAN
and LAN interfaces. If you want to use static IP, just configure here with the address, netmask,
gateway and DNS given be the ISP or the network admin.
To Next Page
Loading...
