Internet Telephony PBX System
IPX-330/IPX-2100
109
By specify the domain or IP of the host and how many packets to be sent and click “Run”
button the command begins to process. You'll get results output indicating the reachability of
the destination.
4.9.2 Traceroute
The traceroute command is used to discover the routes that packets actually take when
traveling to their destination.
Click “Traceroute” tab and specify the domain or IP address you want to lookup then click
“Run” button to start the process.
After the process system will notice “Trace Complete” and you can see which routes the
packets taken before reaching the final destination.
To Next Page
Loading...
