Internet Telephony PBX System
IPX-330/IPX-2100
14
Front Panel LED Status Description
WAN
Blinking Green
On
Off
Data transfer
PBX network connection established
Waiting for network connection
LAN
Blinking Green
On
Off
Data transfer
PBX network connection established
Waiting for network connection
FXO
Steady Red
Blinking
Off
Ready/Standby
Ringing
Module not available
SYS
Blinking Green
On
Off
System is working
System doesn’t boot
System failure
Physical interfaces description
1 Reset
System reboot: Press less than 5 secs
Reset to Factory Default: Press over 6 secs.
2 12V DC
12V DC Power input outlet
3 LAN/WAN
The LAN/WAN port support auto negotiating Fast Ethernet
10/100BASE-TX networks. The WAN port allows your IP PBX to be
connected to an Internet Access device, e.g. router, cable modem,
ADSL modem, through a CAT.5 twisted pair Ethernet cable.
4 Console
Show information of system
5
FXO
FXO port is connects to PBX or CO line with RJ11 (Write) analog
line. FXO port was connected to the extension port of a PBX or
directly connected to a PSTN line of carrier.
6
USB
For external store device to store voice and voicemail
Please be reminded to reset to factory default. Uploaded music setting (on hold
music) and backup file will not be removed.
To Next Page
Loading...
