Internet Telephony PBX System
IPX-330/IPX-2100
16
Physical interfaces description
1 Reset
System reboot: Press less than 5 secs
Reset to Factory Default: Press over 6 secs.
2 12V DC
12V DC Power input outlet
3 LAN/WAN
The LAN/WAN port support auto negotiating Fast Ethernet
10/100BASE-TX networks. The WAN port allows your IP PBX to be
connected to an Internet Access device, e.g. router, cable modem,
ADSL modem, through a CAT.5 twisted pair Ethernet cable.
4 Console
Show information of system
5 USB
For external store device to store voice and voicemail
6 Slot 1/Slot 2
2 external slots with compliant FXO/FXS/GSM module.
FXO module is connected to PBX or CO line with RJ11 analog line.
FXO port is connected to the extension port of a PBX or directly
connected to a PSTN line of carrier.
FXS module is connected to Phone with RJ11 analog line. FXS port
is connected to your telephone sets, fax, or Trunk Line of PBX.
GSM module is connected to Global System for Mobile
Communications (GSM) with SIM Card.
Supporting 2 slots, user can buy expansion module like IPX-21FO (4FXO),
IPX-21SL (2FXO+2FXS) or IPX-21GS (4GSM) for extending port service.
To Next Page
Loading...
