Internet Telephony PBX System
IPX-330/IPX-2100
33
Item Explanation
Context Custom dial plan for this trunk, by default it’s using the “default” dial
plan. Configure only if this trunk is for branch office integration, so the
calls coming from the other side can dial out from this IPPBX trunk
directly. DO NOT change it unless you know how exactly this option
works.
Language You can choose a language here; the system will indicate the
incoming calls from this trunk with the voice prompts you selected.
Audio Codecs Select the audio codec/codecs the provider can support.
Video Codecs If the ITSP supports video call, you can enable compatible video
codecs here for video phone calls.
Except the configuration options related to the service provider and your account
details, please do not change the trunk advanced parameters if you are not familiar
with. After the SIP trunk is successfully added you can see it’s listed here on this
page
You can configure the Analog/GSM line through PLANET IP PBX. The same analog line can’t
be used in multiple trunks. If you don't have available analog/GSM trunk, you can't set up
trunk.
2) FXO/GSM Trunk
Click【FXO/GSM Trunk】->【New FXO/GSM Trunk】:
On the IPPBX front panel, red LED indicates the RJ11 interface is FXO. You should attach the
telephone wire from your telecom to the FXO ports. Once connected you should be able to see
the connection status on the Operator page in the “FXO/FXS/GSM Ports” section.
To be able to use these lines connected on FXO ports to make phone calls, you have to use
them to create trunk/trunks first. Navigate to web menu Basic->Trunks->FXO/GSM Trunks.
To Next Page
Loading...
