Internet Telephony PBX System
IPX-330/IPX-2100
37
Item Explanation
user extension number and the dialed numbers.
Call Duration Limit Specify how long the calls can be made using this dial rule.
Time Rule Set a time condition when this dial rule can be used.
Available Trunks All existing trunks in the IPPBX system.
Selected Trunks Trunk/Trunks can be used by this dial rule.
Custom Pattern Dial patterns act like a filter for matching numbers dialed with trunks.
The various patterns you can enter are similar to Asterisk's definition
of them:
X — Refers to any digit between 0 and 9
N — Refers to any digit between 2 and 9
Z — Any digit that is not zero. (e.g. 1 to 9)
. — Wildcard. Match any number of anything. Must match
*something*.
Delete ____ digits
prefix from the front
and auto-add
________ digit
before dialing
The first blank is to strip some digit/digits before dialing out. Here you
need to fill in a count of number. The second blank is to prepend
some digit/digits before dialing out. Here you need to fill in the exact
number to be added in front of the dialed number.
For example a user dialed 912345678 using the dial rule introduced
above, the prefix 9 at the first digit will be removed, and 00 will be
added, so eventually the user will call the number 0012345678.
Dial plans
There’s a default dial plan already existed in the IP PBX system. Normally you just have to
click “Edit” button on the default dial plan “DialPlan1” and tick on all dial rules to enable them
then the extension users will be able to call any destinations using the trunk lines of the IP PBX
system.
To Next Page
Loading...
