Internet Telephony PBX System
IPX-330/IPX-2100
54
General
Item Explanation
Opermode Set the Opermode for FXO Ports
ToneZone Select the tone zone of your country.
Ring Timeout(s) FXO (FXS signaled) devices must have a timeout to determine
if there was a hangup before the line was answered. This value
can be tweaked to shorten how long it takes before DAHDI
considers a non-ringing line to have hung up.
Relax DTMF Relax DTMF
Send Caller ID After Some countries (UK) have ring tones with different ring tones
(ring-ring), which means the caller ID needs to be set later on,
and not just after the first ring, as per the default (1).
Echo Cancel Enable/Disable software Echo Cancel algorithm.
Echo Training Enabling echo training will cause the PBX system to mute the
channel, send an impulse, and use the impulse response to
pre-train the echo canceller so it can start out with a much
closer idea of the actual echo. Value may be "yes", "no", or a
number of milliseconds to delay before training (default = 400).
This option does not apply to hardware echo cancellers.
3.5.1.3 SIP Settings
【Global SIP Settings】is appropriate for professionals. If anything needs to be modified,
please contact our tech-support people.
To Next Page
Loading...
