Planet NVR-820 User Manual

NetworkVideoRecorderwithHDMI
NVR‐820/NVR‐1620
Chapter 3. Connecting to the NVR
There are various ways you can connect to the NVR and below are the suggested methods for
different network setups:
The NVR is placed in a network with a DHCP server: Connect to the NVR by using “Device
Search” Utility.
The NVR is placed in a network without DHCP server (or you are connecting to it directly):
Access NVR with its default IP (192.168.0.20).
3.1 Using Device Search Utility
If the NVR is placed in a corporate network or a local area network where a DHCP server is
already presented, please install the “Device Search” utility from the bundled CD disk.
To begin, launch the “Device Search” utility from the CD and proceed with the installation.

15

Planet NVR-820 Specifications

General

Brand	Planet
Model	NVR-820
Category	Network Hardware
Language	English