Planet NVR-820 User Manual

NetworkVideoRecorderwithHDMI
NVR‐820/NVR‐1620

43
The NVR supports three connection types that can be configured depending on how the
network is set up.
If you wish to set the recorder to a static IP address in your local area network,
1. Choose “Static IP” from the “Connection Type” drop-down menu
2. Enter the IP address, subnet mask, default gateway address and DNS server address for the
recorder
* The recorder can detect the presence of a DHCP server upon startup. It sets itself to static IP
address if there is no DHCP server currently presented in the network. Its DHCP server function
is also turned on at the same time to assign IP addresses to cameras that are later connected to
the network or you can manually turn off the DHCP server function from "System
Configurations">>"Network Setup">>"DHCP Server" if you wish to use a separate DHCP
server.
7.1.2 DHCP Server

Planet NVR-820 Specifications

General

Brand	Planet
Model	NVR-820
Category	Network Hardware
Language	English