Planet NVR-820 - 12.1.8 Channel Configurations - Adding a Camera (Add manually)

NetworkVideoRecorderwithHDMI
NVR‐820/NVR‐1620
12.1.8 Channel Configurations -- Adding a Camera (Add
manually)
To add a camera manually, go directly to the "Channel Setting" page, and enter the camera's
IP address, HTTP port, user name and password. Click "Detect" to retrieve camera's settings.
The progress will be displayed. Once it's successfully detected, follow the procedures
described in the previous section to finish configuring and adding camera to the NVR.

98