NetworkVideoRecorderwithHDMI
NVR‐820/NVR‐1620
Once the installation is complete, please check the “Finish”.
Please go to Start => Programs => NVR => Search NVR to run the search tool. Then you will
see the utility start searching the network.
The NVR should be located and its IP address should be displayed: Double-click on it and the
program should automatically access the NVR’s web administration page from your default
browser.
You may change NVR’s IP address by clicking on the button highlighted below.
You will be prompted for the NVR’s login information before proceeding to change device’s IP
address.
17
To Next Page
Loading...
Need help?
General
