Planet WGSW-24040 - System Timezone; System Firmware Load

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
228
Parameters:
<ip_addr>: IP address (a.b.c.d), default: Show IP address
Default Setting:
0.0.0.0
Example:
Set SNTP server:
SWITCH/>system sntp 220.130.158.52
System Timezone
Description:
Set or show the system timezone offset.
Syntax:
System Timezone [<offset>]
Parameters:
<offset>: Time zone offset in minutes (-720 to 720) relative to UTC
Default Setting:
0
Example:
To set timezone:
Switch/>system timezone 0
System Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
System Firmware Load <ip_server> <file_name>
Parameters: