Planet WGSW-24040 - RSTP Status

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
261
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable RSTP point2point
disable: Disable RSTP point2point
auto : Automatic RSTP point2point detection
Default Setting:
Auto
Example:
Enable RSTP P2P mode for port1
SWITCH/>rstp p2p 1 enable
RSTP Status
Description:
Show RSTP status.
Syntax:
RSTP Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show RSTP status
SWITCH/>rstp status
=================================================================
VLAN ID : 3
Bridge ID : 32771:00-30-4f-24-24-c1
Root ID : 32771:00-30-4f-24-24-c1
Root Port : -
Root Cost : 0
Topology Flag: Steady
Port Port Role State Path Cost Edge P2P Neigb
------ ------------- ---------- ------------- ------ ------ -------
1 Disabled Disabled 1 No Yes RSTP