Planet WGSW-24040 - RSTP Cost; RSTP Priority

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
259
Default Setting:
Disable
Example:
Enable rstp mode for port1
SWITCH/>rstp mode 1 enable
RSTP Cost
Description:
Set or show the RSTP path cost.
Syntax:
RSTP Cost [<port_list>] [<path_cost>]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.
<path_cost>: RSTP path cost (1-2000000000) or 'auto'
Default Setting:
Auto
Example:
Set RSTP cost value in 1 for port1
SWITCH/>rstp cost 1 1
RSTP Priority
Description:
Set or show the RSTP priority.
Syntax:
RSTP Priority [<port_list>] [<priority>]
Parameters:
<port_list>: Port list or 'all'. Port zero means aggregations.