Planet WGSW-24040 - LLDP Optional TLV; LLDP Interval

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
295
LLDP Optional TLV
Description:
Show / Set LLDP Optional TLVs.
Syntax:
LLDP Optional_TLV [<port_list>] [port_descr|sys_name|sys_descr|sys_capa|mgmt_addr] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
port_descr : Description of the port
sysm_name : System name
sys_descr : Description of the system
sys_capa : System capabilities
mgmt_addr : Master's IP address
(default: Show optional TLV's configuration)
enable : Enables TLV
disable : Disable TLV
(default: Show optional TLV's configuration)
Default Setting:
Description of the port: Enable
System name: Enable
Description of the system: Enable
System capabilities: Enable
Master's IP address: Enable
Example:
Disable description of the port for port1
SWITCH/>lldp optional_tlv 1 port_descr disable
LLDP Interval
Description:
Set or show LLDP Tx interval.
Syntax:
LLDP Interval [<interval>]
Parameters:
<interval>: LLDP transmission interval (5-32768)
Default Setting:
30