Planet WGSW-24040 - Qos QCL Add

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
271
QoS QCL Port [<port_list>] [<qcl_id>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<qcl_id> : QCL ID
Default Setting:
1
Example:
Set QCL ID5 for port10
SWITCH/>qos qcl port 10 5
QoS QCL Add
Description:
Add or modify QoS Control Entry (QCE).
If the QCE ID parameter <qce_id> is specified and an entry with this QCE ID already exists, the QCE will be modified.
Otherwise, a new QCE will be added. If the QCE ID is not specified, the next available QCE ID will be used.
If the next QCE ID parameter <qce_id_next> is specified, the QCE will be placed before this QCE in the list. If the next
QCE ID is not specified, the QCE will be placed last in the list.
Syntax:
QoS QCL Add [<qcl_id>] [<qce_id>] [<qce_id_next>]
(etype <etype>) |
(vid <vid>) |
(port <udp_tcp_port>) |
(dscp <dscp>) |
(tos <tos_list>) |
(tag_prio <tag_prio_list>)
<class>
Parameters:
<qcl_id> : QCL ID
<qce_id> : QCE ID (1-24)
<qce_id_next> : Next QCE ID (1-24)
etype : Ethernet Type keyword