Planet WGSW-24040 - Dot1 X Holdtime

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
283
300
Example:
Set age time in 100 seconds
SWITCH/>dot1x agetime 100
Dot1x Holdtime
Description:
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Dot1x Holdtime [<hold_time>]
Parameters:
<hold_time>: Hold time before MAC addresses that failed authentication expire
(default: Show hold time)
Default Setting:
10
Example:
Set hold time in 100 seconds
SWITCH/>dot1x holdtime 100