User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
281
<reauth_period>: Period between reauthentications (1-3600 seconds)
(default: Show reauthentication period)
Default Setting:
3600
Example:
Set period re-authentication time in 3000 seconds
SWITCH/>dot1x period 3000
Dot1x Timeout
Description:
Set or show the time between EAPOL retransmissions.
Syntax:
Dot1x Timeout [<eapol_timeout>]
Parameters:
<eapol_timeout>: Time between EAPOL retransmissions (1-255 seconds)
(default: Show retransmission timeout)
Default Setting:
30
Example:
Set re-transmission time in 60 seconds
SWITCH/>dot1x timeout 60
Dot1x Statistics
Description:
Show 802.1X statistics.
Syntax:
Dot1x S
tatistics [<port_list>
] [clear|eapol|radius]
To Next Page
Loading...
Need help?
General