Planet WGSW-24040 - 6.11 LLDP Command

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
294
6.11 LLDP Command
LLDP Configuration
Description:
Show LLDP configuration.
Syntax:
LLDP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
LLDP Mode
Description:
Set or show LLDP mode.
Syntax:
LLDP Mode [<port_list>] [enable|disable|rx|tx]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable LLDP reception and transmission
disable: Disable LLDP
rx : Enable LLDP reception only
tx : Enable LLDP transmission only
(default: Show LLDP mode)
Default Setting:
Disable
Example:
Enable port1 LLDP function.
SWITCH/>lldp mode 1 enable