Planet WGSW-24040 - Dot1 X Re-Authentication; Dot1 X Period

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
280
Refresh (restart) 802.1X authentication process.
Syntax:
Dot1x Authenticate [<port_list>] [now]
Parameters:
<port_list>: Port list or 'all', default: All ports
now : Force reauthentication immediately
Dot1x Re-authentication
Description:
Set or show Reauthentication mode.
Syntax:
Dot1x Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable: Disable reauthentication
(default: Show reauthentication mode)
Default Setting:
Disable
Example:
Enable re-authentication function
SWITCH/>dot1x reauthentication enable
Dot1x Period
Description:
Set or show the period between reauthentications.
Syntax:
Dot1x Period [<reauth_period>]
Parameters: