Planet WGSW-24040 - LLDP Information; LLDP Statistics

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
297
Syntax:
LLDP Reinit [<reinit>]
Parameters:
<reinit>: LLDP reinit delay (1-10)
Default Setting:
2
Example:
Set LLDP reinit delay value in 3
SWITCH/>lldp reinit 3
LLDP Information
Description:
Show LLDP neighbor device information.
Syntax:
LLDP Info [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
LLDP Statistics
Description:
Show LLDP Statistics.
Syntax:
LLDP Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear LLDP statistics