User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
251
(default: Show accepted frame types)
Default Setting:
All
Example:
Set port20 that allow tagged frames only
SWITCH/>vlan frametype 20 tagged
VLAN Ingress Filter
Description:
Set or show the port VLAN ingress filter.
Syntax:
VLAN IngressFilter [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable VLAN ingress filtering
disable : Disable VLAN ingress filtering
(default: Show VLAN ingress filtering)
Default Setting:
Disable
Example:
Enable VLAN ingress filtering for port20
SWITCH/>vlan ingressfilter 20 enable
VLAN Link Type
Description:
Set or show the port VLAN link type.
Syntax:
VLAN LinkT
ype [<port_list>] [untagged|tagged]
To Next Page
Loading...
Need help?
General