Planet WGSW-24040 - 6.2 Port Management Command

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
233
6.2 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Display port1~4 status
SWITCH/>port configuration 1-4
Port State Mode Flow Control MaxFrame Power Excessive Link
------ -------- ------ ----------------- --------------- -------- ------------ ----
1 Enabled Auto Disabled 9600 Enabled Discard Down
2 Enabled Auto Disabled 9600 Enabled Discard Down
3 Enabled Auto Disabled 9600 Enabled Discard Down
4 Enabled Auto Disabled 9600 Enabled Discard 100fdx
Port State
Description:
Set or show the port administrative state.
Syntax:
Port State [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port
disable : Disable port
(default: Show administrative mode)