Planet WGSW-24040 - 6.8 802.1 x Port Access Control Command

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
277
6.8 802.1x Port Access Control Command
Dot1x Configuration
Description:
Show 802.1X configuration.
Syntax:
Dot1x Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show IEEE802.1x status of port1
SWITCH/>dot1x configuration 1
Mode : Disabled
RADIUS Server : 0.0.0.0
RADIUS Secret :
Reauthentication: Disabled
Period : 3600
Timeout : 30
A
ge Period : 300
Hold Time : 10
Port Admin State Port State Last Source Last ID
------ ------------------ ------------------------- ----------------- -------
1 Authorized 802.1X Disabled - -
Dotx1 Mode
Description:
Set or show the 802.1X mode for the switch.
Syntax:
Dot1x Mode [enable|disable]
Parameters:
enable : Enable 802.1X