Planet WGSW-24040 - 6.6 Multicast Configuration Command

User’s Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
263
6.6 Multicast Configuration Command
IGMP Configuration
Description:
Show IGMP snooping configuration.
Syntax:
IGMP Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Default Setting:
IGMP Mode: Disabled
Flooding : Disabled
Example:
Enable IGMP mode
SWITCH/>igmp mode enable
IGMP Mode
Description:
Set or show the IGMP snooping mode.
Syntax:
IGMP Mode [enable|disable]
Parameters:
enable : Enable IGMP snooping
disable: Disable IGMP snooping
(default: Show IGMP snooping mode)
Default Setting:
Disabled
Example: