Planet WNRT-627 - Host List Configuration

User’s Manual of WNRT-627
-101-
5.12.2 Host
Choose menu “Access Control → Host”, you can view and set a Host list in the screen as shown in
Figure 5-55. The host list is necessary for the Access Control Rule.
Figure 5-55 Access Control host Settings
The p
age includes the following fields:
Object Description
Here displays the description of the host
and this description is unique.
Host Description
Here displays the information abo
ut the host. It can be IP or MAC.
Information
To modify or delete an exi
sting entry.
Modify
Table 5-32
To add a new entry, please follow the steps below.
Step 1. Click the Add New… button.
Step 2. In the Mode field, select IP Address or MAC Address.
If you select IP Address, the screen shown is Figure 5-56.
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In LAN IP Address field, enter the IP address.
If you select MAC Address, the screen shown is Figure 5-57.
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In MAC Address field, enter the MAC address.
Step 3. Click the Save button to complete the settings.