Planet WNRT-627 - DHCP Server Configuration; DHCP Settings Details

User’s Manual of WNRT-627
-73-
5.7 DHCP
There are three submenus under the DHCP menu (shown in Figure 5-30): DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
Figure 5-30 The DHCP
menu
5.7.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, you can configure the DHCP Server on the page (shown in
Figure 5-31).The Router is set up by default as a DHCP (Dynam
ic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN.
Figure 5-31 DHCP Settings
The p
age includes the following fields:
Object Description
DHCP Server
Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must