User’s Manual of WNRT-627
-150-
“Service Port” blank, and your IP address for the “IP Address” blank, taking 192.168.1.169 for
an example, remember to Enable and Save.
Figure A-3 Virtual Servers
Figure A-4 Add or Modify a Virtual Server Entry
Your opposite side should call your WAN IP, which is displayed on the “Status”
page.
4) How to enable DMZ Host: Log in to the Router, click the “Forwarding” menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click Enable radio button and
To Next Page
Loading...
