User’s Manual of WNRT-627
-157-
Figure B-3 TCP/IP – Obtain an IP address automatically
Setting IP address manually
1 Select Use the following IP address radio button.
2 If the Router's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254),
and Subnet mask 255.255.255.0.
3 Type the Router’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4 Select Use the following DNS server addresses radio button. In the Preferred DNS Server
field you can type the DNS server IP address which has been provided by your ISP
To Next Page
Loading...
