Planet WNRT-627 - Page 60

User’s Manual of WNRT-627
-60-
Router.
Select any chann
el width from the pull-down list. The default setting is
automatic, which can adjust the channel width for your clients
automatically.
Channel width
You ca
n limit the maximum tx rate of the Router through this field.
Max Tx Rate
Enable Wireless Router
Radio
The wireless radio of this Router can be enabled or disabled to allow
wireless stations access.
Enable SSID Broadcast
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. If you
select the Enable SSID Broadcast checkbox, the Wireless Router will
broadcast its name (SSID) on the air.
Table 5-11
If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel
Width selecting field will turn grey and the value will become 20M, which is unable
to be changed.
Object Description
Chec
k this box to enable WDS. With this function, the Router can bridge
two or more WLANs. If this checkbox is selected, you will have to set the
following parameters as shown below. Make sure the following settings
are correct.
Enable WDS
Table 5-12