OPERATION & MAINTENANCE MANUAL TMS2000/3000
TMS Operations and Maintenance Manual.docx February 12, 2018
PAGE 11
2.4 ACCESS MODE DETAILS
Within the ACCESS mode there are several levels of menus, as illustrated in the above figure. The main menus
include LOG reports, LEAK TEST, CONFIGuration, CLOCK read/set, and INITialization of DATA including logs and
Configuration memory. Note: that the LOG and CONFIG main menus contain numerous submenus. These submenus
will be described in detail later in this section. The main menus are as follows:
Log The LOG menu is used to review and print any of the various log reports generated by the TMS. The
system does not allow the user to edit any of these reports.
Leak test The LEAK Test menu is used to select, schedule, and enable in-tank leak tests.
Config The CONFIGuration menu is used to review, edit, or print system configuration data.
Clock The CLOCK menu is used to edit system date, time, and day.
Init data The INITialize DATA menu is used to initialize all or selected log report groups, or configuration
memory.
INVENTORY
DELIVERY
bulk SALES
THEFTS
produc t ORDERS
WATER remo val
in- TANK LEAK tes t resu l ts
in- t ank LEAK tes t HISTo ry
LINE LEAK tes t resu l ts
ALARMS
EVENTS
VIEW
in- t ank LEAK
TEST scheduling
CLOCK
INITialize D ATA
LOG
CONFIGur ation
ACCESS
SYSTEM TEST
HEADER
TANK
PROBE
RELaY TANK
RELaY CC
RELaY SENSor
RELaY Line Leak Pane l
RELaY SITE
RELaY MODE
CC INPUT
SENSoR INPu t
INVENTORY
THEFT
MODEM
DIAL OUT
in- TANK LEAK tes t
ANALOG OUTputs
To Next Page
Loading...
