OPERATION & MAINTENANCE MANUAL TMS2000/3000
TMS Operations and Maintenance Manual.docx February 12, 2018
PAGE 5
SECTION 1 – SYSTEM OVERVIEW
1.1 FRONT PANEL DESCRIPTION
The front panel of the TMS is available in four different configurations as listed below:
-1... Console without LED display, without internal printer
-2... Console with LED display, without internal printer
-3... Console with display and internal impact receipt printer
-4... Console with display and internal impact printer w/ autowinder
This manual describes operational procedures pertaining to -2, -3, and -4 consoles. Refer to TMS Communicator
Instruction Manual for operating the TMS via TMS Communicator software.
As illustrated in Figure 1.1 below, the TMS front panel consists of an LED data display presented in either English
or Metric units, depending on the site’s requirements, with visual alarm and mode annunciators, audible alarm
annunciator, user-friendly pushbutton controls, security lock, and optional impact printer with or without autowinder.
Figure 1.1: TMS Overlay Layout