Pneumercator TMS2000 - Scheduling the Leak Test

OPERATION & MAINTENANCE MANUAL TMS2000/3000
TMS Operations and Maintenance Manual.docx February 12, 2018
PAGE 31
Scheduling the leak test
The leak test scheduling can be found in the LEAK TEST menu. This allows you to determine how long to run
the test, as well as, when the test will start. The scheduling features are used with the TIME and RELAY modes of
operation. The MANUAL mode does not use any scheduling features. The AUTO mode only makes use of the
SCHEDULE Day of the Month (DD) setting. This setting determines when an alarm log is generated by the TMS for
not completing a leak test. If you set this to fifteen, the alarm will be generated on the fifteenth of the month at midnight
if a leak test has not been satisfactorily been completed for the month. The following are examples of how to setup
the scheduling for the TIME and RELAY modes.
TEST LENGTH
START TIME
SCHEDULE TYPE
SCHEDULE RATE
1) Perform a
2 HOUR
test at
22:30
THIS
SUNDAY
4 HOUR
EVERY
MONDAY
8 HOUR
PERCENT VOLUME
TUESDAY
ON 1
ST
WEDNESDAY
ON 2
ND
THURSDAY
ON 3
RD
FRIDAY
ON 4
TH
SATURDAY
DAY
MONTH
MINUTE
Perform a 2-hour test at 10:30pm this Saturday.
TEST LENGTH
START TIME
SCHEDULE TYPE
SCHEDULE RATE
2) Perform a
2 HOUR
test at
17:00
THIS
SUNDAY
4 HOUR
EVERY
MONDAY
8 HOUR
PERCENT VOLUME
TUESDAY
ON 1
ST
WEDNESDAY
ON 2
ND
THURSDAY
ON 3
RD
FRIDAY
ON 4
TH
SATURDAY
DAY
MONTH
MINUTE
Perform a 4-hour test at 5:00pm every Wednesday.
TEST
LENGTH
START
TIME
SCHEDULE
TYPE
SCHEDULE
RATE
SCHEDULE DD
(Day of the Month)
3) Perform a
2 HOUR
test at
12:00
THIS
SUNDAY
on the
28th
4 HOUR
EVERY
MONDAY
8 HOUR
PERCENT
TUESDAY
VOLUME
WEDNESDAY
ON 1
ST
THURSDAY
ON 2
ND
FRIDAY
ON 3
RD
SATURDAY
ON 4
TH
DAY
MONTH
MINUTE
Perform an 8-hour test at 12:00 noon every month on the 28
th
.