Pneumercator TMS2000 - Printer Servicing; Ribbon Replacement; Receipt Printer (900438-1) Printer Paper Replacement (No Winder)

OPERATION & MAINTENANCE MANUAL TMS2000/3000
TMS Operations and Maintenance Manual.docx February 12, 2018
PAGE 72
SECTION 3 – PRINTER SERVICING
3.1 RIBBON REPLACEMENT
3.2 RECEIPT PRINTER (900438-1)
RIBBON
PRINTER RIBBON REPLACEMENT
1. Remove knob and swing open the printer assembly to access the ribbon.
Push on the right side of the ribbon to eject. Insert the new ribbon in its
place and push it into place.
REPLACEMENT RIBBON P/N 183501-1
PRINTER PAPER REPLACEMENT (NO WINDER)
1. Lift the used paper roll from the rack and remove the roll from the shaft.
2. Insert the shaft into the new paper roll and return it to the rack.
3. Feed the paper into the printer mechanism and press the paper feed
button until paper feeds through to the outside of the cover.
REPLACEMENT PAPER ROLL P/N 183601-1
PAPER
ROLL
RACK
PAPER
SHAFT
PRINTER
MECHANISM
RIBBON
PAPER
FEED
BUTTON
PRESS HERE
TO REPLACE
RIBBON
PAPER
OUTSIDE
COVER
FEED
FEED
KNOB
VIEW INSIDE COVER SIDE VIEW
PAPER