OPERATION & MAINTENANCE MANUAL TMS2000/3000
TMS Operations and Maintenance Manual.docx February 12, 2018
PAGE 47
Riser gpi Riser GPI (LPI): Represents the collective volume of the riser pipes above the O/W Separator.
This context sensitive setting is only visible if the Probe Type is set for MP452.
Entry Type: 5-digit numeric
Range Limits: 0 – 9.9 inches [0 – 99 millimeters]
Default/Initialized value: 0
Return Return: Press EDIT (TEST) to exit Probe submenu.
Note: Press STEP (MODE) to return to top of Probe submenu showing Probe CF
(Probe Calibration Factor)
To Next Page
Loading...
