R
Rachel BrownJul 27, 2025
How to fix Polaris 2002 Snowmobile Offroad Vehicle rear suspension bottoms too easily?
- TTanya WilliamsJul 27, 2025
To address a rear suspension that bottoms out too easily on your Polaris Offroad Vehicle, consider these adjustments: Ensure the FRSS block is in the highest position. Adjust the torsion spring blocks to their highest position. Increase preload on the front track shock by adjusting the coil over spring. For 121 models only, consider changing torsion springs to .421 diameter. Alternatively, switch to a heavier coil spring. Increase front track shock compression damping by turning the screw clockwise.