44
THE PERFECT FIT
Front Suspension Adjustments
Break in the suspension for approximately 150 miles (240 km) and
re-grease all suspension parts before fine-tuning adjustments are made.
Settings will vary from rider to rider, depending on rider weight,
vehicle speed, riding style, and trail conditions. We recommend
starting with factory settings and then customizing each adjustment
individually to suit rider preference. The machine should be
methodically tested under the same conditions after each adjustment
(trail and snow conditions, vehicle speed, riding position, etc.) until the
best ride is achieved. Adjustments should be made to one area at a
time in order to properly evaluate the change.
All snowmobile suspensions have a front and a rear suspension, each
of which has adjustment options.
Independent Front Suspension (IFS)
The IFS is made up of the skis
(1), front shocks and springs
(2), and the components t hat
connect these parts to both the
steering, such as the radius rods
(3), and to the machine itself,
such as the trailing arms (4).
Front suspension adjustment
options are limited to the front
shocks and springs.
NOTE: Although the front
suspension on your machine
may not look exactly like the
illustration, it will have the
same parts and functions as
those illustrated.
IFS Adjustment Options
DF ront shock spring preload
DOptional springs
DOptional valving (if equipped with RYDE FX
t or Foxt Shocks)
DIndy Select (if equipped)
1
2
3
4
To Next Page
Loading...
Need help?
General
